Thermal Imaging Accessories

AGM-2107 ADM QR Mount

PART NO.: 6306SVM1

AGM-2107 is the advanced base for Secutor/Victrix/Python/Anaconda series of thermal scopes. AGM-2107 features two throw levers for added mount security. The quick release weapon mount attaches to the thermal scope and affixes it to any Picatinny rail system without the use of additional tools or throw levers. The weapon mount is constructed of sturdy aluminum parts. Weight: 130 g / 4.6 oz Dimensions: 130 x 50 x 21 cm / 5.1 x 2.0 x 0.8 inches

€225.60

AGM Eyepiece for Rattler TC35/50

PART NO.: 6328ERC1

€200.00

AGM-2114 ADM QR Mount

PART NO.: 63061141

Low Base Singel Lever QR Mount (Height: 0.78") for Rattler TC Family.

AGM-2113 ADM QR Mount

PART NO.: 6306LSR1

ADM Single Lever QR Mount (Hight: 1.03") for Rattler TC / Neith TC

AGM-2111 ADM QR Mount

PART NO.:  6306LMR1

AGM-2111 is the advanced base for Rattler TS family. AGM-2111 features two throw levers for added mount security. The quick release weapon mount attaches to the thermal scope and affixes it to any Picatinny rail system without the use of additional tools or throw levers. The weapon mount is constructed of sturdy aluminum parts. Weight: 140 g / 5 oz Dimensions: 145 x 50 x 25 mm / 5.7 x 2.0 x 1.0 inches

€225.60

AGM Solar Power Bank

PART NO.: 6308APB1

AGM Power Bank, User Manual, Carrying case, USB Cable Type-C. Micro USB Cable This universal power bank / QI charger aquipes with a solar panel that captures energy of day light and transforms it into charging power for your devices. You can charge anything devices because it has built-in Micro-USB, USB-C and Lightingcabels, and QI wireless technology. Thanks to its rugged shock-proof housing, rain-proof design, and 10000mAh battery capacity, it’s perfect for long extreme hikes. Just attach this rain-resistant solar power bank to your backpack and your gadgets will always have extra power.

€32.00

AGM-2116 ADM QR Mount

PART NO.: 63061161

AGM-2116 ADM QR Mount is the advanced base for Adder series of thermal scopes. AGM-2116 mount with two 30 mm rings features two throw levers for added mount security. The quick release weapon mount attaches to the thermal scope and affixes it to any Weaver or Picatinny rails system without the use of additional tools or throw levers. Offered the 2" cantilever throws the scope out front, allowing you to get the right eye relief. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems. Weight: 238 g / 8.4 oz Dimensions: 150 x 50 x 67 cm / 5.9 x 2.0 x 2.6 in Centerline Heist: 37.3 mm / 1.47 in

€331.00

AGM Tripod with a Grip for Thermal Imaging

PART NO.: 6606TTR1

AGM Tripod with a Grip offers sturdy, professional support for your device. The quick-release plate on the head features a standard 1/4”-20 threaded screw for mounting compatible scopes, cameras, or other gear. PISTOL GRIP can take the ease of spotting or photographing on a tripod to a new level.

€279.00

AGM HD Recorder

PART NO.: 6305HDR1

External Recorder for AGM Thermal imaging systems is a high-tech, compact and durable device that will allow you to record anything you like within up to 4 hours of operational time. High-quality video with 640x480 resolution would become a nice opportunity to review the best moments of your observation sessions.

€252.00

AGM-2112 ADM QR Mount

PART NO.:  6306SMR1

AGM-2112 is the smallest base for Rattler TS family. The quick release weapon mount attaches to the thermal scope and affixes it to any Picatinny rail system without the use of additional tools or throw levers. The weapon mount is constructed of sturdy aluminum parts. Weight: 86 g / 3 oz Dimensions: 95 x 50 x 25 mm / 3.7 x 2.0 x 1.0 inches

€188.40

Quick release Front scope mount for AGM Rattler TC35-384

PART NO.: 6606RMR1

Additional Professional Quick release Front scope mount Rusan with reducing ring for AGM Rattler TC35-384 (available sizes
30 mm, 34 mm, 36 mm
, 38 mm, 40 mm, 41 mm, 42 mm, 42.5 mm, 44 mm,
46 mm, 46.7 mm, 47 mm, 48 mm, 49 mm, 50 mm,
51 mm, 52 mm, 53 mm, 54 mm,
55 mm, 56 mm, 57 mm, 57.5 mm,
58 mm, 58.4 mm, 59 mm, 59.5 mm,

60 mm, 60.5 mm, 61 mm, 62 mm,
63 mm, 63.5 mm, 64 mm, 64.5 mm, 65 mm,
66 mm, 67 mm, 68 mm, 69 mm,
71 mm, 72 mm, 80 mm),
please mention needed size in order's comments, if you have questions, please do not hesitate to contact us

€210.00

AGM Wi-Fi Attachment

PART NO.: 6305WIF1

External WiFi Module for AGM Thermal imaging systems will help you to connect your device and transmit the entire image captured by your thermal vision device to your smartphone or tablet. After a few simple steps your mobile device could become a viewfinder. Photo and video recorded by thermal vision system will be initialized via smartphone and it will not even distract you from observation session.

€220.00

AGM Front Scope Mount #1

PART NO.: 6606SM11

AGM Front Scope Mount is the optional adapter to install the clip-on device onto day optics with 25.4-30 mm objective diameter. This adapter works with Comanche-22, Victrix TC, Anaconda TC series clip-ons (NOT COMPATIBLE WITH RATTLER SERIES CLIP ON’S). Use the optional Front Scope Mount o attach a clip-on device to the front lens of a daytime optic. The mount must fit with the day optics front lens diameter. There are optional mounts for 25.4-30 mm, 38-42 mm, 46.7-50 mm, 56-58.7 mm and 62 mm objective lenses diameter. DIAMETER OF THE INSERTS: 25,4 mm; 30,0 mm CLEAR APERTURE OF DAY SCOPE LENS: 20 mm; 24 mm EXAMPLE OF THE SCOPES: - Leupold 1.5-5x20 PR (25,4 mm insert) - Leupold 1.5-5x20 MR/T M2 (30,0 mm insert) - Zeiss 1.1-4x24T (30,0 mm insert)

€109.00

AGM Front Scope Mount #4

PART NO.: 6606SM41

AGM Front Scope Mount is the optional adapter to install the clip-on device onto day optics with 56-58.7 mm objective diameter. This adapter works with Comanche-22, Victrix TC, Anaconda TC series clip-ons (NOT COMPATIBLE WITH RATTLER SERIES CLIP ON’S). Use the optional Front Scope Mount o attach a clip-on device to the front lens of a daytime optic. The mount must fit with the day optics front lens diameter. There are optional mounts for 25.4-30 mm, 38-42 mm, 46.7-50 mm, 56-58.7 mm and 62 mm objective lenses diameter. DIAMETER OF THE INSERTS: 56,0 mm; 57,0 m; 58,7 mm CLEAR APERTURE OF DAY SCOPE LENS: 50 mm EXAMPLE OF THE SCOPES: - Zeiss 2.5 10x50 (56,0 mm insert) - Schmidt & Bender 3-12x50 (57,0 mm insert) - Leupold 4.4-14x50 (58,7 mm insert) - Leupold VX-III 3.5-10x50 (58,7 mm insert)

€109.00

AGM Front Scope Mount #5

PART NO.: 6606SM51

AGM Front Scope Mount is the optional adapter to install the clip-on device onto day optics with 62 mm objective diameter. This adapter works with Comanche-22, Victrix TC, Anaconda TC series clip-ons (NOT COMPATIBLE WITH RATTLER SERIES CLIP ON’S). Use the optional Front Scope Mount o attach a clip-on device to the front lens of a daytime optic. The mount must fit with the day optics front lens diameter. There are optional mounts for 25.4-30 mm, 38-42 mm, 46.7-50 mm, 56-58.7 mm and 62 mm objective lenses diameter. DIAMETER OF THE INSERTS: 25,4 mm; 30,0 mm CLEAR APERTURE OF DAY SCOPE LENS: 20 mm; 24 mm EXAMPLE OF THE SCOPES: - Leupold 1.5-5x20 PR (62,0 mm insert) - Leupold 1.5-5x20 MR/T M2 (62,0 mm insert) - Zeiss 1.1-4x24T (62,0 mm insert)

€109.00

Quick release Front scope mount for AGM Victrix, Comanche 22

PART NO.: 6606RMV1

Additional Professional Quick release Front scope mount Rusan with reducing ring for AGM Victrix, Comanche 22 (available sizes
, 34 mm, 36 mm, 38 mm, 40 mm, 41 mm
, 42 mm, 42.5 mm, 44 mm, 46 mm, 46.7 mm,
47 mm, 48 mm, 49 mm, 50 mm, 51 mm,
52 mm, 53 mm, 54 mm, 55 mm, 56 mm,
57 mm, 57.5 mm, 58 mm, 58.4 mm,
59 mm, 59.5 mm, 60 mm, 60.5 mm,
61 mm, 62 mm,

60 mm, 60.5 mm, 61 mm, 62 mm,
63 mm, 63.5 mm, 64 mm, 64.5 mm, 65 mm,
66 mm, 67 mm, 68 mm, 69 mm,
71 mm, 72 mm, 80 mm),
please mention needed size in order's comments, if you have questions, please do not hesitate to contact us

€180.00

AGM Front Scope Mount #3

PART NO.: 6606SM31

AGM Front Scope Mount is the optional adapter to install the clip-on device onto day optics with 46.7-50 mm objective diameter. This adapter works with Comanche-22, Victrix TC, Anaconda TC series clip-ons (NOT COMPATIBLE WITH RATTLER SERIES CLIP ON’S). Use the optional Front Scope Mount o attach a clip-on device to the front lens of a daytime optic. The mount must fit with the day optics front lens diameter. There are optional mounts for 25.4-30 mm, 38-42 mm, 46.7-50 mm, 56-58.7 mm and 62 mm objective lenses diameter. DIAMETER OF THE INSERTS: 46,7 mm; 48,0 mm; 48,7-49,0 mm; 49,5 mm; 50,0 mm CLEAR APERTURE OF DAY SCOPE LENS: 40 mm; 42 mm EXAMPLE OF THE SCOPES: - Leupold 3.5-10x40 (46,7 mm insert) - Leupold VX-II 3-9x40 (46,7 mm insert) - Zeiss 1.5-6x42 (48,0 mm insert) - Swarovski PV-N 2.5-10x42 (48,0 mm insert) - Meopta Artemis 3000 3-9x42 (48,7-49,0 mm insert) - Meopta Artemis 3000 4-12x40 (49,5 mm insert) - Schmidt & Bender 10x42 (50,0 mm insert)

€109.00

AGM Front Scope Mount #2

PART NO.: 6606SM21

AGM Front Scope Mount is the optional adapter to install the clip-on device onto day optics with 38-42 mm objective diameter. This adapter works with Comanche-22, Victrix TC, Anaconda TC series clip-ons (NOT COMPATIBLE WITH RATTLER SERIES CLIP ON’S). Use the optional Front Scope Mount o attach a clip-on device to the front lens of a daytime optic. The mount must fit with the day optics front lens diameter. There are optional mounts for 25.4-30 mm, 38-42 mm, 46.7-50 mm, 56-58.7 mm and 62 mm objective lenses diameter. DIAMETER OF THE INSERTS: 38,0 mm; 42,0 mm CLEAR APERTURE OF DAY SCOPE LENS: 32 mm; 36 mm EXAMPLE OF THE SCOPES: - Meopta Artemis 2000 4x32 (38,0 mm insert) - Leupold Mark 4 3-9x36 (42,0 mm insert) - Leupold Mark 4 2.5-8x36 (42,0 mm insert) - Kahles 4x36 (42,0 mm insert)

€109.00

AGM Dovetail Helmet Mount for Shroud

PART NO.: 6103HS51C

The AGM Dovetail Helmet Mount is designed to installation the various NVGs to the helmet with shroud. It is universal mounts because it does not require a special shroud. This mount features all adjust ability features to place NVG in proper position. Supports the safe disconnect feature that allow to adjust the mount for a secure lock with the shroud or to allow it to break away under stress so as to prevent injury. Please note that mount utilizes a dovetail interface. Please make sure you have the proper adapter when purchasing this mount.

€315.00

Hard Case

PART NO.: 6610HCS1

Protective case, made of solid, robust material and designed special for safe storage and transportation.

Applicable to:

Expand
€100.00

AGM Extended Battery Pack

PART NO.: 6308EXB1

Extended Battery Pack - Extended Battery Pack with Rechargeable Batteries and battery charger for all AGM High Performance Digital and Thermal Devices

€219.00

We use cookies to make our website easier for you to use. By using the site you consent to the use of cookies.
Learn more about cookie settings Privacy Policy Understood