Shipping Note for Orders Under €350
For orders with a total value below €350, the shipping cost ranges from €20 to €45+, depending on your destination country.
After placing your order, our manager will contact you and provide the exact shipping cost based on your delivery address.
AGM Sacrificial Window NVM40
PART NO.: 6101SS41
Please note that the shipping cost within the European Union may reach €15–30, depending on your country.
The AGM Sacrificial Window for NVM40 is a protective accessory designed to help shield the primary objective lens from scratches, dust, sand, and minor field contact.
This replaceable protective window acts as a front barrier for the objective lens, helping reduce the risk of damage from abrasive particles and everyday outdoor handling. If the window becomes scratched or worn, it can be replaced without risking the main optical surface.
Applicable to:
AGM Sacrificial Window NVM50
PART NO.: 6101SS51
Please note that the shipping cost within the European Union may reach €15–30, depending on your country.
The AGM Sacrificial Window for NVM50 is a replaceable protective window designed to help protect the objective lens of compatible NVM50 night vision devices.
It acts as a front protective layer against dirt, sand, scratches, and minor outdoor contact. If the window becomes damaged, it can be replaced while helping preserve the primary optical surface.
Applicable to:
AGM Sacrificial Window W14/7
PART NO.: 6101SSW1
Please note that the shipping cost within the European Union may reach €15–30, depending on your country.
The AGM Sacrificial Window W14/7 is a replaceable protective window designed to help protect the objective lens of compatible AGM Wolf-14 and Wolf-7 night vision devices.
It serves as a front protective layer against dirt, sand, scratches, and minor outdoor contact. If damaged, it can be replaced while helping preserve the primary lens surface.
Applicable to:
AGM Demist Shield NVM40
PART NO.: 6101DS41
Please note that the shipping cost within the European Union may reach €15–30, depending on your country.
The AGM Demist Shield for NVM40 is a protective eyepiece accessory designed to help maintain a clear view in humid, cold, or rapidly changing outdoor conditions.
This shield attaches to the eyepiece of a compatible night vision device and helps reduce fogging and condensation caused by moisture, body heat, or sudden temperature changes.
Applicable to:
AGM Demist Shield NVM50
PART NO.: 6101DS51
Please note that the shipping cost within the European Union may reach €15–30, depending on your country.
The AGM Demist Shield for NVM50 is a protective eyepiece accessory designed to help maintain a clear view in humid, cold, or rapidly changing outdoor conditions.
This shield attaches to the eyepiece of a compatible NVM50 night vision device and helps reduce fogging and condensation caused by moisture, body heat, or sudden temperature changes.
Applicable to:
AGM Demist Shield W14/7
PART NO.: 6101DSW1
Please note that the shipping cost within the European Union may reach €15–30, depending on your country.
The AGM Demist Shield W14/7 is an anti-fog eyepiece accessory designed for compatible AGM Wolf-14 and Wolf-7 series night vision devices.
It attaches to the eyepiece and helps create a protective barrier against fogging, condensation, and changing outdoor conditions.
AGM Demist Shield W7 (set of 2 pcs)
PART NO.: 6101DSW1x2
Please note that the shipping cost within the European Union may reach €15–30, depending on your country.
The AGM Demist Shield W7 Set includes two anti-fog eyepiece shields designed for compatible AGM Wolf-7 night vision goggles.
Supplied as a pair, the shields attach to both eyepieces and help reduce fogging caused by body heat, moisture, and temperature changes.
Applicable to:
AGM Amber Filter
PART NO.: 6133AMBF0
Please note that the shipping cost within the European Union may reach €15–30, depending on your country.
The AGM Amber Filter is an optical accessory designed to soften the bright green image produced by standard image intensifier tubes and improve viewing comfort during longer observation sessions.
By shifting the green phosphor image toward a softer yellow-green tone, this filter can help reduce eye fatigue and make transitions back to natural darkness more comfortable when the device is removed.
Applicable to:
AGM Afocal Magnifier Lens Assembly, 3X
PART NO.: 61023XA1
The AGM 3X Afocal Magnifier Lens Assembly is designed to increase the magnification of compatible night vision devices, providing a closer view for longer-distance observation.
This 3X afocal magnifier helps extend observation capability by increasing image scale while maintaining practical image clarity for outdoor viewing. It is useful for users who want more reach from a compatible night vision monocular or binocular-style device without switching to a different optical system.
Designed for quick installation, the magnifier attaches to the existing 1X objective lens and does not require complex tools or permanent modification. Included mounting adapters help support compatibility across multiple AGM night vision systems.
Applicable to:
AGM A-focal G50 Magnifier Lens Kit, 3X
PART NO.: 6102AFK1
The AGM A-focal G50 Magnifier Lens Kit, 3X is an optical upgrade designed to increase the observation range of compatible AGM NVG-40 and NVG-50 systems.
This 3X afocal lens kit helps extend recognition distance while keeping the device configuration practical for outdoor night-time observation. The lens attaches directly to compatible objective lenses, allowing users to add magnification without changing the main device.
Applicable to:
AGM Afocal Magnifier Lens Assembly, 5X
PART NO.: 61025XA1
The AGM 5X Afocal Magnifier Lens Assembly is an optical accessory designed to increase the magnification of compatible AGM night vision devices for longer-distance observation.
This 5X afocal magnifier helps extend the observation capability of compatible night vision monoculars and goggles by providing a more detailed view at longer distances. It is a practical accessory for users who need additional optical reach while keeping their existing night vision device setup.
Designed for quick installation, the magnifier attaches directly to the existing 1X objective lens without requiring permanent modification. The included mounting adapters help support compatibility across multiple AGM night vision systems, making the lens assembly suitable for different outdoor observation setups.
Applicable to:
AGM 8x Lens for PVS-7
PART NO.: 61018XL1
The AGM 8x Lens for PVS-7 is a high-magnification optical upgrade designed to extend the observation capability of compatible PVS-7 night vision goggles.
Featuring multi-coated glass and a weather-resistant design, this lens attaches to the existing PVS-7 objective lens without special tools. Because of the increased magnification, stable handheld use or tripod-supported observation is recommended for best viewing comfort.
Applicable to:
AGM 51 degree FOV Lens Kit
PART NO.: 610150K1
The AGM 51-Degree FOV Lens Kit is an optical upgrade designed to expand the field of view of compatible night vision devices.
By replacing standard 40-degree optics, this lens kit increases the field of view up to 51 degrees, helping users scan wider areas with less head movement during night-time observation.
AGM Front Scope Mount #1
PART NO.: 6606SM11
The AGM Front Mount #1 is a specialized adapter designed to securely attach a compatible clip-on device directly to the front lens of a daytime optic. It is compatible with the Comanche-22, Victrix TC, and Anaconda TC series clip-on systems.
Please note: This adapter is NOT compatible with Rattler series clip-on systems.
To ensure a proper and secure fit, the mount must match the front lens diameter of the daytime optic. This specific #1 Mount is designed for objective lens diameters from 25.4 mm to 30.0 mm.
This front mount helps position a compatible clip-on device in front of a daytime optic while maintaining stable optical alignment. Choosing the correct mount size is important because the adapter must correspond to the outside diameter of the objective lens housing.
Applicable to:
AGM Front Scope Mount #2
PART NO.: 6606SM21
The AGM Front Mount #2 is a specialized adapter designed to securely attach a compatible clip-on device directly to the front lens of a daytime optic. It is compatible with the Comanche-22, Victrix TC, and Anaconda TC series clip-on systems.
Please note: This adapter is NOT compatible with Rattler series clip-on systems.
To ensure a proper and secure fit, the mount must match the front lens diameter of the daytime optic. This specific #2 Mount is designed for objective lens diameters from 38.0 mm to 42.0 mm.
This front mount helps position a compatible clip-on device in front of a daytime optic while maintaining stable optical alignment. Choosing the correct mount size is important because the adapter must correspond to the outside diameter of the objective lens housing.
Applicable to:
AGM Front Scope Mount #3
PART NO.: 6606SM31
The AGM Front Mount #3 is a specialized adapter designed to securely attach a compatible clip-on device directly to the front lens of a daytime optic. It is compatible with the Comanche-22, Victrix TC, and Anaconda TC series clip-on systems.
Please note: This adapter is NOT compatible with Rattler series clip-on systems.
To ensure a proper and secure fit, the mount must match the front lens diameter of the daytime optic. This specific #3 Mount is designed for objective lens diameters from 46.7 mm to 50.0 mm.
This front mount helps position a compatible clip-on device in front of a daytime optic while maintaining stable optical alignment. Choosing the correct mount size is important because the adapter must correspond to the outside diameter of the objective lens housing.
Applicable to:
AGM Front Scope Mount #4
PART NO.: 6606SM41
The AGM Front Mount #4 is a specialized adapter designed to securely attach a compatible clip-on device directly to the front lens of a daytime optic. It is compatible with the Comanche-22, Victrix TC, and Anaconda TC series clip-on systems.
Please note: This adapter is NOT compatible with Rattler series clip-on systems.
To ensure a proper and secure fit, the mount must match the front lens diameter of the daytime optic. This specific #4 Mount is designed for objective lens diameters from 56.0 mm to 58.7 mm.
This front mount helps position a compatible clip-on device in front of a daytime optic while maintaining stable optical alignment. Choosing the correct mount size is important because the adapter must correspond to the outside diameter of the objective lens housing.
Applicable to:
AGM Front Scope Mount #5
PART NO.: 6606SM51
The AGM Front Mount #5 is a specialized adapter designed to securely attach a compatible clip-on device directly to the front lens of a daytime optic. It is compatible with the Comanche-22, Victrix TC, and Anaconda TC series clip-on systems.
Please note: This adapter is NOT compatible with Rattler series clip-on systems.
To ensure a proper and secure fit, the mount must match the front lens diameter of the daytime optic. This specific #5 Mount is designed for 62.0 mm objective lens diameters.
This front mount helps position a compatible clip-on device in front of a daytime optic while maintaining stable optical alignment. Choosing the correct mount size is important because the adapter must correspond to the outside diameter of the objective lens housing.
Applicable to:
Quick release Front scope mount Rusan for AGM Victrix, Comanche 22/X
PART NO.: 6606RMV1
The Quick-Release Front Mount by Rusan is a front adapter with a reducing ring, designed to attach compatible AGM Victrix or Comanche 22 clip-on systems to the objective lens of a daytime optic.
Important: Please specify your required size in the order comments during checkout.
This quick-release adapter is useful when a precise front-mounted connection is required for a supported daytime optic. If you are unsure which size is needed, contact AGM before ordering to confirm the correct objective housing diameter.
Applicable to:
AGM Cap Goggle Kit W
PART NO.: 6104GKW1
The AGM Cap Goggle Kit W is a cap-based mounting kit designed to support compatible AGM NVM night vision devices for hands-free use.
This kit provides a practical head-supported mounting option for users who want a lightweight hands-free setup. It helps position compatible night vision devices for outdoor observation while keeping the user’s hands free for other tasks.
AGM Soft Headgear with plate for Shroud mounting
PART NO.: 6135SHS1
The AGM Soft Headgear with Shroud Mounting Plate is a lightweight head-mounted support system designed for comfortable hands-free use with compatible night vision devices.
Designed for extended observation sessions, this adjustable soft headgear helps provide a secure and comfortable fit while supporting compatible night vision optics in front of the user’s line of sight. The integrated shroud mounting plate provides a stable connection point for compatible mounting hardware.
The rear section can accommodate counterweights or external battery packs, helping balance front-mounted optics and reduce user fatigue during longer periods of hands-free observation.
AGM Goggle Kit W G50
PART NO.: 6104GK51
The AGM Goggle Kit W G50 is a cap-mounted support kit designed to help attach compatible AGM night vision goggle systems for hands-free observation.
This kit provides a practical mounting solution for users who need a lightweight head-supported setup without relying on a full helmet system. It helps position the device for hands-free viewing during outdoor observation and night-time field use.
Applicable to:
AGM PVS14 Binocular Bridge
PART NO.: 6104XP4B1
The AGM PVS-14 Binocular Bridge is a mounting accessory designed to connect two compatible PVS-14 monoculars into a dual-tube observation setup.
This lightweight bridge provides viewing flexibility with two independent articulating arms, allowing one or both monoculars to be moved out of the line of sight when needed. It also supports interpupillary adjustment for improved comfort during longer sessions.
Applicable to:
AGM PVS14 J-Arm Dovetail Adapter
PART NO.: 6103XDJ41
The AGM PVS-14 J-Arm Dovetail Adapter is a secure mounting accessory designed to attach a compatible PVS-14 night vision monocular to head-mounted systems using a stable dovetail interface.
The dovetail interface provides a more stable and secure connection compared to standard bayonet-style mounting solutions, helping keep the monocular properly aligned during hands-free observation. This makes the adapter a practical upgrade for users who want improved comfort, better balance, and more consistent device positioning during extended outdoor use.
Designed with observation flexibility in mind, the adapter allows smooth lateral adjustment so the monocular can be positioned for either left-eye or right-eye viewing. When used with compatible AGM dovetail mounting systems, it can also support automatic power control when the device is flipped up or down.
Applicable to:
Weaver adapter for Infrared illuminator
PART NO.: 6107WAP1
Please note that the shipping cost within the European Union may reach €15–30, depending on your country.
The Weaver Adapter for Infrared Illuminator is a mounting accessory designed to provide a Weaver-style rail interface on a compatible PVS-14 night vision monocular.
This adapter attaches directly to the monocular housing and provides a secure rail point for mounting external infrared illuminators or other compatible accessories.
Applicable to:
AGM Sioux TH 850 LongRange IR Illuminator
PART NO.: 501SIOUX850IT1
The AGM Sioux TH 850 Long-Range Infrared Illuminator is an external IR light source designed to enhance compatible night vision devices in very low ambient light.
Operating at 850 nm, this illuminator provides strong near-infrared output for extended viewing capability. Adjustable beam divergence and stepless intensity control help match the illumination pattern to close-range or longer-distance observation needs.
Applicable to:
AGM Sioux850 Long Range Infrared Illuminator with Mount, Dovetail to Weaver Transfer Piece, Rechargeable Battery, and Charger
PART NO.: 501SIOUX850IR1
The AGM Sioux850 Long Range Infrared Illuminator Kit is a complete 850 nm IR illumination package designed to improve the performance of compatible night vision devices in very low or no ambient light.
This illuminator emits near-infrared light that can be detected by compatible night vision devices, helping extend practical viewing capability in dark environments where additional IR illumination is needed.
The kit includes the illuminator together with mounting accessories, a rechargeable battery, and a charger, making it a ready-to-use solution for compatible AGM night vision setups. Adjustable output power and beam divergence allow the user to switch between wider close-range illumination and a tighter beam for longer-distance observation.
Applicable to:
AGM Sioux TH 940 LongRange IR Illuminator
PART NO.: 501SIOUX940IT1
The AGM Sioux TH 940 Long-Range Infrared Illuminator is an external IR light source designed to support compatible night vision devices in very low ambient light.
Operating at 940 nm, this illuminator provides near-infrared support with a less visible emitter glow than typical 850 nm IR lights. Adjustable beam divergence and stepless intensity control help match the illumination pattern to the observation distance and environment.
Applicable to:
AGM Sioux940 Long-Range Infrared Illuminator comes included with Rechargeable Battery and Charger
PART NO.: 501SIOUX940IR1
The AGM Sioux940 Long-Range Infrared Illuminator Kit is a 940 nm IR illumination package designed to improve the performance of compatible night vision devices in very low or no ambient light.
Operating at 940 nm, this illuminator emits near-infrared light that is less visible to the naked eye than standard 850 nm illumination while remaining usable with compatible night vision devices. It helps improve viewing capability in dark environments where additional IR light is needed.
The kit includes the illuminator together with a rechargeable battery and charger, making it a ready-to-use solution for compatible AGM night vision setups. Adjustable output power and field-of-view divergence allow the user to adapt the illumination pattern for different observation distances and conditions.
Applicable to:
AGM Titanium Tripod with a Grip
PART NO.: 6606TTR1
The AGM Titanium Tripod with Pistol Grip provides a stable and versatile platform for spotting scopes, cameras, and compatible night vision or thermal equipment, helping reduce shake during longer observation sessions.
Engineered for rugged outdoor performance, the tripod uses durable anodized cast aluminum and adapts easily to uneven terrain. Three leg angle settings, rubber twist locks, a center-column ballast hook, and a built-in bubble level help keep the setup stable and properly aligned.
The pistol grip control head allows smooth one-handed pan and tilt adjustment. Squeezing the trigger releases the ball head for movement, while releasing it locks the equipment into the selected position. The quick-release platform uses a universal 1/4-20 mounting screw and supports 360-degree rotation.
Applicable to:
Hard Case
PART NO.: 6610HCS1
The AGM Hard Case is a durable protective case designed for safe storage and transport of compatible AGM night vision and thermal imaging devices.
Built for outdoor use, travel, and long-term storage, the AGM Hard Case helps protect sensitive optical equipment from impact, moisture, dust, and movement during transport. Its rugged shell and internal foam support help keep the device secure while reducing everyday handling risks.
Applicable to:
EN
de
es
bg
fr
it
cs
pl
hr
ro
sk
sv
hu
pt
zh-CN
zh-TW